How Much Concrete Do I Need for a Driveway? Work It Out Before You Order
A driveway is a rectangular slab, so the maths is the same as for a slab — measure the length, the width and the thickness, then work out the volume.
The formula
Volume in cubic yards = Length (ft) × Width (ft) × Thickness (ft) ÷ 27
Thickness is usually given in inches, so convert it to feet first — 4 inches is 0.33 feet. The ÷ 27 step matters because there are 27 cubic feet in one cubic yard, and ready-mix concrete is sold by the cubic yard.
A worked example: a 20 ft × 12 ft driveway at 4 in thick
- Volume: 20 × 12 × (4 ÷ 12) = 80 cubic feet
- Cubic yards: 80 ÷ 27 = 2.96 cubic yards
- Bags: about 134 × 80 lb bags
Add 10% for waste — an uneven base, spillage, and concrete left in the mixer — and you should order about 3.26 cubic yards, about 147 × 80 lb bags.
At 6 in thick the same driveway is 120 cubic feet = 4.44 cubic yards, 4.89 with waste, 200 bags (220 with waste).
How thick should a driveway be?
Four inches is the practical minimum for cars on firm ground. Five to six inches is recommended for driveways and anything heavier than a car, and thicker still on soft or poorly drained soil.
Bags or ready-mix?
Above about 2 cubic yards, ready-mix is usually better than bags — 134 bags would take many hours to mix by hand.
Before you pour
Compact the subgrade and gravel base first, plan control joints, and pour in one continuous run where possible.
If you would rather not do the arithmetic by hand, run the same numbers through a driveway concrete calculator — it gives cubic yards, bag counts and cost in one step.
Comments
Post a Comment